Pump Plunger Assemblies
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Replacement Brushes; 2/Set
Easy to install, these replacement drive parts will help extend the life of your drive.
Electron Microscopy Sciences Edwards EMF10 Oil Mister Filter
Oil mist filters help with exhaust mist from the vacuum pump which sticks to any surface that it touches and becomes a dust magnet. Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen with gas ballast or when pumping at high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pumpor pump oil.
Protection from oil mist emissions as required by COSHH and health and safety regulations. Use of optional oil return kits results in reduced oil level maintenance and savings in pump oil and if the oil element becomes blocked. An integral pressure relief valve opens. For use with the RV3, RV5, and RV8.
Bergen Industrial Supply SILICONE TC GASKET .75IN 50PK
Gasket, Tube Size 3/4 In, Tri-Clamp Connection, Material of Construction Platinum Silicone, Temp. Range -40F to 450F, Standards FDA, CLASS VI. 50/pack.
Gardner Denver Welch Vacuum Tech Inc INLET/EXHAUST CONNECTORS HOSE
This item has a minimum qty of 2 per supplier requirements.
LONGER PUMP Pumps/ peristaltic pumps/ Longer Pump BT100-3J with pump head YZ1515X-A, Flow Rate: 0.0002-380ml/min, CE Certified, Suitable for Laboratory and Industrial Use
Pumps/ peristaltic pumps/ Longer Pump BT100-3J&YZ1515X-ASpecifications- Speed: 0.1rpm-100rpm, CW/CCW- Speed resolution: 0.1rpm- Control mode: Membrane keypad, external signal control and communication control are available- Display: 3-digit LED display for current speed, 3 LED indicators for operating status- External control: Start/stop, direction and speed control (4-20mA, 0-5V, 0-10V, 0-10kHz external control module optional)- Communication interface: RS485- Power-off memory: Return to previous status when powered on- Prime: For fast filling and emptying at full speed- Dimension (L × W × H): 232 × 142 × 149 (mm)- Power supply: AC 100V-240V 50/60Hz- Operating temperature: 0 to 40°C- Relative humidity: <80%- IP rating: IP20- Weight: 2.3kg
AVANTOR MASTERFLEX (VWR LLC) Masterflex Stainless steel mounting hardware for two I/P Easy-Load pump heads.
Stainless steel mounting hardware for two I/P Easy-Load pump heads.
AVANTOR MASTERFLEX (VWR LLC) Masterflex PTFE Flow Through Tubing Weight for 5/16 to 7/16"" ID Tubing.
PTFE Flow Through Tubing Weight for 5/16 to 7/16 in. ID Tubing.
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Easy-Load Pump Head Mounting Hardware, Mounts Three Pump Head, Stainless Steel; 2/Set
This mounting hardware is designed to make the Masterflex L/S series pump head flexible for a wide range of applications. Choose from different material or increase the number of pump heads on a L/S drive with mounting hardware. This hardware is compatible with the Masterflex L/S series peristaltic drives.
TELEDYNE LEEMAN LABS PVC PUMP TUBES 1.14 MM RED/RED
This item has a minimum qty of 2 per supplier requirements.
TBG PMP PVC 045 R/R 12 in. PKG-12
